Stealth Mode Fireteam
Stealth Mode Fireteam
Teilen
The kit includes following components
Front LED Extremely bright front LEDs that can be easily mounted underneath the roof at existing holes of the cage.
Rear LED Two red rear LEDs that can be easily attached to existing holes on the cage.
Power Up The Power Up module allows for easy power supply of the LEDs via the receiver.
Note The LEDs from the Wald Light Kit can only be operated with the Power Up module.
Installation instructions
1. Attach the front LED under the roof by replacing the two original M2.5 screws with the included M2.5 screws.
2. Attach the two tail lights to the cage using 4 of the included M2.5 screws.
3. Connect the power-up module to the LED lights and secure it to a suitable location inside the body, using cable ties or tape.
4. Plug the included cable into the receiver. This will connect to the power-up module when the body is assembled. When the body is removed, the connection will also be disconnected at this point.
5. Secure the cables for the LED lights, using cable ties, so that they are protected and do not come into contact with sharp edges. Make sure that the cables are not under tension and have enough slack.
Tolles Kit und der Einbau ist absolut einfach.
Schade, daß kein Gewebeschlauch (wie auf den Bildern zu sehen) mehr genutzt wird und wenn die beigelegten Schrauben auch noch in schwarz wären, gäbe es nichts zu meckern.
Aber optisch eine Aufwertung des Fahrzeug's.