Thunder Light Team Corally Kronos

The kit consists of the following components

Front LED Extremely bright front LEDs easily installed on the differential housing.
Rear LEDs Extremely bright rear LED simply attached to the spoiler.
Power Up Easy power supply for the LEDs via the receiver.

Attention: The LEDs from the Wald Light Kit can only be operated with the Power Up module.

Installation Notes
The installation is very simple. Once the front body is cut to fit, the LEDs can be secured with screws into existing holes.

1. Attach the front LED bracket to the front differential housing using the supplied M2.5 screws.
2. Secure the front LED to the bracket with the included M3 screw and route the cable through the shock tower.
3. Loosen the two screws above the spoiler and then the four screws on the sides of the spoiler bracket.
4. Attach the rear LED using the original screws and route the cables through the shock tower.
5. Connect the Power Up module to the receiver and secure it in a suitable location, e.g., with cable ties or tape.
6. Plug the LED cables into the Power Up module.
7. Secure the LED cables, e.g., with cable ties, to protect them from sharp edges. Ensure that the cables are not under tension but have enough slack. Especially, the front bumper can deform significantly!